SAMSUNG NP300E5A TURN ON BUT NO IMAGE

Please write all information:
1.Model from case
2.Board model/number
3.Describe problem clearly
Forum rules
Please write all information:
1.Model from case
2.Board model/number
3.Describe problem clearly
4.What you did to solve problem
Post Reply
User avatar
jp_jota
Newbie
Newbie
Posts: 1
Joined: Sat May 25, 2019 11:16 am

SAMSUNG NP300E5A TURN ON BUT NO IMAGE

Post by jp_jota »

Hello my friends, I need your help again. I am trying to repair a samsung np300e5a, which turns on but no picture appears and the fan runs at full speed,
I dont have a schematic for this model and I do not have the boardview, which makes it difficult to identify any component.

I notice also that the 1912a mosfet with 1.060v heats up a lot, And the coil next to it also heats, it replaces it with new and stays the same. if i remove the cpu heat desappers.

3.3v ok
5v ok
19v ok

MODEL: SCALA3-15 / PETRONAS-15 REV 1.5
BA41-01839A PTC

if it is possible someone can help me and facilitate the boardview or schematic of this model. thank you
User avatar
Narendra IT tech
Newbie
Newbie
Posts: 2
Joined: Sun Jun 02, 2019 9:17 am

Re: SAMSUNG NP300E5A TURN ON BUT NO IMAGE

Post by Narendra IT tech »

There are a few possibilities as to what might be wrong with your laptop. The most likely of these possibilities is that your motherboard or " Graphics card " may need to replaced.
Post Reply

Return to “Ask for Laptop Repair help!”

Who is online

Users browsing this forum: No registered users and 35 guests