Samsung N148
Posted: Sun Apr 17, 2016 3:49 am
Case study Samsung N148
Prob: Dead
Diag: checking 3.3v is not present on switch. Checking IO then saw that some pins of IO open from board. Resolder it but prib not solved.
Sol: finaly I slowly heat on the ICH. Prob solved, its working and display comming
[ Post made via Android ]
Prob: Dead
Diag: checking 3.3v is not present on switch. Checking IO then saw that some pins of IO open from board. Resolder it but prib not solved.
Sol: finaly I slowly heat on the ICH. Prob solved, its working and display comming
[ Post made via Android ]