m5030 nodisplya
Forum rules
Please write all information:
1.Model from case
2.Board model/number
3.Describe problem clearly
4.What you did to solve problem
Please write all information:
1.Model from case
2.Board model/number
3.Describe problem clearly
4.What you did to solve problem
-
- Newbie
- Posts: 1
- Joined: Tue Feb 23, 2016 12:16 pm
m5030 nodisplya
when the adapter is connetcted the lap will switch on auto maticly but no display all voltag ok. bios re progeamed same status. i need a help
Re: m5030 nodisplya
Forum rules
Please write all information:
1.Model from case
2.Board model/number
3.Describe problem clearly
4.What you did to solve problem
Please write all information:
1.Model from case
2.Board model/number
3.Describe problem clearly
4.What you did to solve problem
-
- Guru
- Posts: 182
- Joined: Thu Feb 18, 2016 11:32 am
- Location: Kabul, Afghanistan
Re: m5030 nodisplya
check all voltages the ACIN goes through it
and also check voltage like
3.3v alw and 5 alw and also Ic controller for these two voltages
thanks
and also check voltage like
3.3v alw and 5 alw and also Ic controller for these two voltages
thanks
Re: m5030 nodisplya
if your laptop AMD check all voltages
than you check processor
next you check AMD chip
than you check processor
next you check AMD chip
Re: m5030 nodisplya
please share beep codes as dell laptop
by the motherboard if 8 beeps go for igp chip else on 7 go 4 cpu
by the motherboard if 8 beeps go for igp chip else on 7 go 4 cpu
-
- Member
- Posts: 22
- Joined: Mon Feb 29, 2016 6:07 am
- Location: Delhi
- Contact:
Re: m5030 nodisplya
SHARE UR MOTHERBOARD PART NUMBER WHEN WE SOLVE UR PROBLEM PERFECTLY
-
- Guru
- Posts: 575
- Joined: Mon Nov 30, 2015 3:10 am
- Location: Ranchi Jharkhand
- Contact:
Re: m5030 nodisplya
you can replace AMD chipset not succes reballing
Re: m5030 nodisplya
chip replacement never be a option first search a question why problem priests then go solution
u having dell pcb its debug codes and debug system soo inhance use it
u having dell pcb its debug codes and debug system soo inhance use it
Who is online
Users browsing this forum: No registered users and 9 guests